01
DESCRIPTIONProduct details
Component
| 1. | Bonnet | Ductile iron GJS-500-7 (GGG-50) |
| 2. | Valve body | Ductile iron GJS-500-7 (GGG-50) |
| 3. | Grooved pin | Stainless steel 316L |
| 4. | Disc rubber | EPDM rubber |
| 5. | Disc pin | DZR brass CW724R, low electrical conductivity |
| 6. | Disc core | Ductile iron GJS-500-7 (GGG-50) |
| 7. | Disc guide | Polyamide |
| 8. | Bypass valve plate | Ductile iron GJS-500-7 (GGG-50) |
| 9. | Seal | EPDM rubber |
| 10. | Cover plate | Ductile iron GJS-500-7 (GGG-50) |
| 11. | Key | Stainless steel |
| 12. | Stem | Stainless steel |
| 13. | Gasket | Ductile iron GJS-500-7 (GGG-50) |
| 14. | Stem collar ring | Stainless steel 1.4021 (420) |
| 15. | Retaining ring | NBR rubber |
| 16. | Bushing | Polyamide |
| 17. | Thrust washer | Stainless steel |
| 18. | Thrust bearing bush | Stainless steel |
| 19. | Stem gasket | EPDM rubber |
| 20. | Sealing gasket | Thermoplastic |
| 21. | Bolt | Stainless steel A2 |
| 22. | Bonnet gasket | EPDM rubber |
| 23. | Pin for air-release valve | Stainless steel 1.4404 |
| 24. | Plug | Duplex stainless steel |
Standards
- Designed to EN 1074 Parts 1 & 2
- Face-to-face dimensions to EN 558 Table 2 Series 15
- Flange drilling to EN1092-2 (ISO 7005-2), PN16
