01
DESCRIPTIONProduct details
Component
| 1. | Shaft pin | DZR brass CW602N |
| 2. | Handwheel | Cast iron GJS-250 (GG-25) |
| 3. | Anti-friction washer | Copper alloy CC491K (LG2) |
| 4. | Actuator mounting flange | Ductile iron GJS-500-7 (GGG-50) |
| 5. | Clamp set | Ductile iron GJS-500-7 (GGG-50) |
| 6. | Guide seal | Ductile iron GJS-500-7 (GGG-50) |
| 7. | Gasket | Polyamide |
| 8. | Stem gasket | NBR rubber |
| 9. | Gland bushing | Polyamide |
| 10. | Seal | NBR rubber |
| 11. | Seal | NBR rubber |
| 12. | Bonnet bolt | Stainless steel A2, fully thermoplastic-coated |
| 13. | Bonnet | Ductile iron GJS-500-7 (GGG-50) |
| 14. | Bonnet gasket | EPDM rubber |
| 15. | Stem | Stainless steel 1.4104 (430F) |
| 16. | Pin | Stainless steel |
| 17. | Disc pin | DZR brass CW626N |
| 18. | Valve disc | EPDM-coated ductile iron |
| 19. | Valve body | Ductile iron GJS-500-7 (GGG-50) |
| 20. | Stud bolt | Stainless steel A2 |
| 21. | Hex nut | Stainless steel A2 |
| 22. | Washer | Stainless steel A2 |
Standards
- Designed to EN 1074 Parts 1 & 2
- Face-to-face dimensions to EN 558 Table 2 Series 14
- Flange drilling to EN 1092-2 (ISO 7005-2), PN10/16
